You need to upgrade your Flash Player


Get Flash Player



Home | Company | Products | Concepts | USP | Clientele | Testimonials | Download | Support | Contact
 
PAUTO 1800  
New series of partly automatic machine with auto bottle ejection system. Developed for lower capital investment package drinking water plant. Processor need of speedy bottle blowing with semi skilled labour operation, safety and minimum cost of bottle making with lower connecting power are the major points considerations.
 
Machine at glance
Automatic PET blower with infra-red heating system and bottle transfer conveyor produces 1800 & 2000 bph with 4-cavity and 3000 bph with six- cavity. Flexible machine can be used for 4-cavity up to 1 liter and 2-cavity up to 2 liter and then single cavity up to 5 liters.

Advantages

  • Higher  production  at lower capital cost
  • Finish bottle is not handled by operator
  • Bottle output is on conveyor (BIS Requirement)
  • Lowest conversion cost.

Note: Wide Mouth JAR attachment can also be provided with this model.

 
 
   
Features:  PAUTO-1800  
   
 Blowing Product  Bottle  
 Blowing Capacity  0.2 -2 liters
 Mould Cavity  4
 Neck Size (max)  30 mm  
 Production Rate  1800- 2000 BPH  
 Operator  One & Two
 Heating Power  21 KWS
 Max Connecting Load  50 KWS
 Process  Preform loading is manual all other automatic, bottle ejections on conveyor automatic.
 Automation  Automatic blown bottle ejection in three piece mould.
   
   
Auxiliary Equipment Specification
 
Air Compressor – 01 No each High Pressure Air dryer with oil and air micron filter
(optional) - 01 No.
   
 Type  Motor  Max. Pressure  F.A.D.  Receiver
 High Pressure Compressor  20 HP  30.0 BAR  37.7 CFM  500 LTR.
 Low Pressure Compressor  15 HP  12.5 BAR  45.00 CFM  500 LTR.
 Type  Refrigerated Air Dryer
 Cfm  40 CFM of Air
 Air pressure  40 KG / SQCM
 Others  With Compressor, Comdensor and Filters
 Inlet temp.  4-5 DEGREE CENTIGRADE
 Outlet temp.  2.5 DEGREE CENTIGRADE
   
01 Ton Water Chiller – 01 No. 20 KVA/3 Phase Stabilizer (optional) – 01 No.
   
 Water Flow Rate  25 LPM / 1500 LPH
 Inlet temp.  14 DEGREE CENTIGRADE
 Oulet temp.  10 DEGREE CENTIGRADE
 Electrical Connection  415V(+5), 50 HZ, 3Phase, 4 Wire AC Supply
 Type of chiller plant  Mobiled Air Cooled
 Cooling Capacity  6000 KCAL/HR
 Refrigerant Cooling Media  AIR, FREON R-22
 Chiller  Coil Type Chiller
 Chiller Circulation Pump  0.5 HP
 Input  295 V to 410V, 3Phase, 4 Wire, 50 HZ Unbalce
 Output  415 V + - 1%, 3Phase, 50HZ
 Cooling  A.N.
 O/p Voltage Adjust  + - 10 V by means of Potentio Meter
 Controls  Auto / Manual
 Specification  O/V & U/V TRIP
 Overload & Shortcircuit Protection by MCB
 Voltmeter to see I/P & O/P Voltages
 Ammeter to see the Load currents
 Built in single phase preventer
 Indication  Mains O/N, O/P ON, O/V, U/V Single phasing trip
 App. Dimensions  W 800MM, D 400MM, H 800MM
   
   
 
Total Connecting Load / Power required for Partly Automatic Pet Stretch Blowing Machine
   
 Description  KWATT  Horse Power (HP)
 Pet Blowing Machine  21.00  28.15
 High Pressure Compressor  15.00  20.00
 Low Pressure Compressor  11.19  15.00
 02 TON Chiller  02 .61  03.50
 Total Connecting Load  49.81  66.65
 Total connecting load / power required for one machine is 66.65 HP
 NOTE: - Actual Consumption will be @ 50% only
 Space required for Partly Automatic Pet Stretch Blowing Machine:  For one machine 15 FEET X 20 FEET